Fundamental:
The automatic slurry sampling machine is a new type of slurry sampling equipment developed by our company's scientific researchers after visiting many mineral processing plants in mining areas and based on repeated experiments. After practical testing, this equipment has opened up an effective way to sample slurry without elevation loss, providing new opportunities for new creation. The mining area provides a new ideal equipment and also provides new development prospects for technical transformation projects in old mining areas.
The equipment is simple in structure, unique and novel, has a scientific and reasonable design, and is very convenient to use and install. Its obvious feature is that it is installed along the direction of the pipeline, without any loss of height to the main slurry, and without any standards for the slurry flow rate, working pressure, and flow rate. , it is more suitable for all conditions of slurry pipeline transportation (or gravity flow). The slurry flow is intercepted vertically and uniformly by the sampling spoon, which meets the standards for slurry sampling in actual mining areas. The sampling accuracy is high and the signature is strong. It is an ideal replacement for other prototype machines. equipment.
Application standards:
The automatic slurry sampler is an electromechanical integrated automatic equipment consisting of a pipeline cover (special structure), a piston machine sampling spoon, a sampling tube, a sealing guide component, a power transmission device and an electrical control part.
The main slurry flow of normal production, without any headroom loss, is introduced from the channel and flows in the casing in the direction of the arrow. When not sampling, the power transmission device is controlled by the electronic control panel. According to the lifting plate, the sampling tube and spoon are placed underneath. At the dead point, the sampling port of the sampling spoon is completely closed to ensure that no slurry leaks out.
When the set sampling time comes, the control panel sends out instructions, and the power transmission device works automatically. According to the lifting pole, the sampling tube and the sampling spoon are evenly pulled up. At this time, the sampling spoon completely removes the main slurry flow in the tube. Cut the section and take it out according to the sampling tube to achieve automatic and accurate sampling.
Performance parameters:
1. Sampling time: 1-5 minutes, 5-30 minutes, set at will
2. Applicable power: 0.55KW
3. Available pipe diameter: 50-100100-150150-200200-300 (mm specifications)
4. There is no standard for the inlet and outlet liquid levels.
