As we all know, the electronic belt scale is a type of equipment that carries out continuous and dynamic measurement and verification of industrial manufacturing materials. In fact, the belt scale can not only measure and verify the materials, but also adds additional adjustment functions. The belt The scale can also be used in the seasoning production stage. As a seasoning belt scale, it can both measure and quantitatively analyze and adjust, which is helpful to improve the efficiency of seasoning and improve the level of manufacturing intelligence. Because the level of intelligence in my country's industrial manufacturing is becoming more and more The higher it is, it has been widely used in the metallurgical industry, decorative building materials, power engineering, food, chemical plants and other fields.
Belt scales have been used in the entire process of manufacturing seasonings. In order to ensure the smooth progress of production, they must be properly used and maintained to avoid direct impact on production due to equipment conditions. The use and maintenance of automatic batching systems are as follows:
It is necessary to check whether the conveyor belt is deflected before and after daily use.
For newly assembled electronic belt scales, within a certain period of time after assembly, a return-to-zero inspection should be carried out every one day, and calibration should be carried out on time.
After daily use, remove material stuck to the scale body and the conveyor belt. If there is any jammed material in the speed sensor and weighing sensor, it should also be removed immediately to ensure that the belt scale works normally and avoid changes in the weighing standard data.
It is necessary to check whether the conveyor belt is deflected before and after daily use.
Whether the weighing roller operates evenly will also directly affect the measurement accuracy of the belt scale. It is necessary to check whether the weighing roller operates smoothly every day. If the roller is lubricated, the belt scale needs to be calibrated again.
During use, if the flow rate is too large or too small within the weighing range of the belt scale, it will directly affect the accuracy and directly affect the service life of the equipment.
Do not weld on the body of the sensor to avoid damaging the sensor.
During system maintenance, especially when the maintenance personnel are standing on the scale shelf for maintenance, the electronic belt scale must remove the weighing sensor to prevent the sensor from being damaged due to overweight.
