Automatic sampling machine, to put it bluntly, is a type of equipment that can be configured to automatically sample according to the system. It is used repeatedly in the transportation of iron ore, grain crops, coal and other items, and based on structural form or function. In terms of distinction, it can be divided into many different types. Let’s talk about its categories below.
According to structural characteristics and application locations, samplers can be divided into three types: container (car, train) sampling equipment, pipeline sampling machines and transmission belt sampling equipment.
Container (vehicle, train) sampling equipment, main purpose: Steam (train) vehicle incoming coal sampling machine has a mechanical automated sampling facility specially designed for sampling of coal transportation vehicles and trains. This facility integrates crushing, sampling, sample collection and It is reduced to integration, easy to operate, reasonable in structure and reliable in operation. It is suitable for coal mining, power plants and coal ports and other places where raw coal testing and sampling are often required.
Principle of automatic sampling machine: The sampling equipment is mainly composed of a sampling head (auger sampling machine), a feeder, a pulverizer, a residual coal processing system and a reduction sample collector. After the sampling head obtains the coal sample, it is processed according to the closed The feeder feeds the pulverizer, and after pulverization, it enters the reduction sample collector. The coal sample according to the reduction enters the sample collector, and the unnecessary coal sample is returned to the vehicle by the remaining coal processing system or directly returned to the coal plant.
Pipeline sampling machine. This equipment is usually installed on the outer wall of the pipeline. It is mainly used to select a sufficient amount of fluid items from the pipeline as test samples. There are piston machines, spiral machines, tube-type machines, etc.. They are more commonly used for particles. Sampling of materials, slurries or small particles.
The transmission belt sampling equipment consists of a middle (overhead) sampling machine, a crusher, a feeding belt conveyor, a divider, a sample collector, a waste material return system and an automatic control system. The transmission belt middle and overhead fully automatic sampling machine is completely To meet the international standards, there are no special requirements for the moisture content and particle size distribution of all coal mines; the sampling interval (time, quality) can be set by the time control panel or system. For safety reasons, the transmission belt intermediate sampling machine is usually used to determine the proportion of the pile of items. Bulk items below 1.6t\/m3.
Principle: The sampling equipment of the automatic sampling machine performs a full cross-section sweep from the transmission belt according to the set time, and the sample to be used enters the primary and secondary feeding belt conveyor through the chute, and at the same time, the sample is evenly sent to the crusher It is crushed to the corresponding particle size distribution (usually 613mm), and then divided into spare and discarded materials according to the secondary transmission belt and reducer. The spare materials are automatically collected in the discharge tank, and the discarded materials are returned to the transmission belt by the bucket elevator.
