Automatic ball adding machineSystem composition
The automatic ball adding machine is composed of an actuator, a ball bin and a control unit. The actuator is composed of a reducer, a belt, a ball catching roller, etc. The control unit is composed of a Siemens PLC, touch screen, ABB inverter (optional), timer, etc. The ball adding machine uses the ball grabber installed on the drum to pick up the ball at will, and then uses the photoelectric detector to complete non-contact inspection, and realizes intelligent identification and control by PLC. It can accurately add balls evenly as needed, and summarize The total number of steel balls. When there are not enough steel balls in the ball warehouse, the machine equipment has an automatic prompt function to complete automatic and unmanned adding of balls.
The automatic ball adding machine has two control methods: manual\/automatic.
transmission mechanism
The transmission mechanism is directly driven by a low-speed 3-phase asynchronous motor to provide power for the system, with a speed of about 8r\/min, or it can be adjusted according to specific applications.
belt scale
Belt scales are used for raw material measurement and flow management applications. To ensure the accuracy of their measurements, the belt scales are required to operate smoothly and without vibration, and each material conveying component operates flexibly. At the same time, the belt scales carry the load evenly when conveying materials, without any uneven load.
Siemens PLC
The automatic ball adding machine PLC realizes intelligent identification and control, can accurately add balls evenly as needed, and summarize the total number of steel balls. When the ball warehouse is not enough, the machine equipment has an automatic prompt function to complete automatic unmanned ball adding.
