In recent years, following the continuous improvement of environmental protection companies, water purification equipment has made rapid progress to a certain extent. Key water purification equipment manufacturing companies have implemented technological changes, improved manufacturing capabilities and manufacturing levels, and urban water treatment The manufacturing level of professional equipment and matching electronic equipment has been greatly improved, and it has a bright future in the future. So how to maintain the automatic dosing machine? Let’s take a look at it together:
1. The pipes of the automatic dosing machine should be kept smooth in time, and all connections, filtering devices, inlets, outlets, etc. of the equipment should be checked regularly and irregularly to see if there are deposits deposited at these locations. If such deposits are found, Symptoms should be sorted out as soon as possible.
2. It is necessary to regularly check the sedimentation delay at the metering pump inlet, and brush the pipelines and filtering devices on time to avoid delays.
3. Regularly check the mixing device, supervise the mixing shaft to rotate smoothly, the centrifugal impeller to twist and deform, and the coupling to prevent excessive shaft torque and loss of mixing power. If it is damaged, replace it immediately.
4. Safety valves, pressure gauges and pipeline valves must be tested regularly to prevent leaks. The standby pump and the service pump should be used in turn to avoid long-term use or discontinuation of the same pump.
The above are the maintenance methods of the automatic dosing machine. I hope it will be helpful to you.
